What do you know about the atomizing nozzle on the closed cooling tower?-Wuxi Ark Fluid Technology Co., Ltd

Home
Products
Ark-The Best Choice Among Cooling Plans

Pursuing perfection is the tenet we have always adhered to in the whole process from selection of raw materials to R&D and manufacture of a series of products.
Case
Ark-The Best Choice Among Cooling Plans

Pursuing perfection is the tenet we have always adhered to in the whole process from selection of raw materials to R&D and manufacture of a series of products.
Service
News
Ark-The Best Choice Among Cooling Plans

Pursuing perfection is the tenet we have always adhered to in the whole process from selection of raw materials to R&D and manufacture of a series of products.
About Ark
Ark-The Best Choice Among Cooling Plans

Pursuing perfection is the tenet we have always adhered to in the whole process from selection of raw materials to R&D and manufacture of a series of products.
Contact
Ark-The Best Choice Among Cooling Plans

Pursuing perfection is the tenet we have always adhered to in the whole process from selection of raw materials to R&D and manufacture of a series of products.
中文

Home
Products
Case
Service
News
About Ark
Contact
中文

语言选择

中文版

Home page

What do you know about the atomizing nozzle on the closed cooling tower?

Release time：

2022-11-30

The atomizing nozzle on the closed cooling tower is an important equipment component, why do you say so? Most of the heat exchange of closed cooling tower will also be carried out in the cooling fin of water spraying filler. The more complex the filler is, the slower the water flow rate will appear. Moreover, the wind resistance caused by the filler will also appear larger. In order to reduce the wind resistance, special attention should be paid to reducing the complex appearance of the filler surface at this moment, which is the unity of the contradiction, that is, the best point of heat dissipation and wind resistance, It is always the people in the cooling tower who are constantly discussing, summarizing and pursuing. So far, no one dares to say that their filler is good, but only better or better than before. The spray type closed cooling tower does not need water spraying filler to dissipate heat, which reduces the ventilation resistance and increases the air flow into the tower. At this time, it will also promote the droplet to fully dissipate heat in the tower. Spray nozzles, also known as atomizing nozzles, rotate atomizing equipment. The swirling atomizing nozzle in the water distribution system is also the end device. The cooling water enters the cavity of the swirling device under a certain working pressure. With the effect of the core column, the geotextile must also pay attention to making the water flow rotate and spray upward from the nozzle at a 30 ° cone angle to become small particles. The traditional closed cooling tower will use the mechanical rotating fan at the top of the tower to carry out air extraction, so as to promote the formation of negative pressure in the tower, and set a certain amount of air flow. The mechanical power is driven by the motor. For the larger closed cooling tower, special attention must be paid to the need to reduce the speed of the reducer to directly ensure the rated speed of the fan itself.

The atomizing nozzle on the closed cooling tower is an important equipment component, why do you say so? Most of the heat exchange of closed cooling tower will also be carried out in the cooling fin of water spraying filler. The more complex the filler is, the slower the water flow rate will appear. Moreover, the wind resistance caused by the filler will also appear larger. In order to reduce the wind resistance, special attention should be paid to reducing the complex appearance of the filler surface at this moment, which is the unity of the contradiction, that is, the best point of heat dissipation and wind resistance, It is always the people in the cooling tower who are constantly discussing, summarizing and pursuing.
So far, no one dares to say that their filler is good, but only better or better than before. The spray type closed cooling tower does not need water spraying filler to dissipate heat, which reduces the ventilation resistance and increases the air flow into the tower. At this time, it will also promote the droplet to fully dissipate heat in the tower. Spray nozzles, also known as atomizing nozzles, rotate atomizing equipment.
The swirling atomizing nozzle in the water distribution system is also the end device. The cooling water enters the cavity of the swirling device under a certain working pressure. With the effect of the core column, the geotextile must also pay attention to making the water flow rotate and spray upward from the nozzle at a 30 ° cone angle to become small particles.
The traditional closed cooling tower will use the mechanical rotating fan at the top of the tower to carry out air extraction, so as to promote the formation of negative pressure in the tower, and set a certain amount of air flow. The mechanical power is driven by the motor. For the larger closed cooling tower, special attention must be paid to the need to reduce the speed of the reducer to directly ensure the rated speed of the fan itself.

Return →